高硬度环保耐蚀柴油机气缸套的研制

在缸套表面进行镍磷复合镀强化处理,可以提高湿式内燃机缸套耐腐蚀性能,但会增加产品的成本。研究了在普通贝氏体气缸套材料基础上去掉贵重金属镍,调整其他成分比例,在确保材料性能不变的前提下,降低产品的成本。结果表明,配合表面强化处理,缸套硬度高、耐腐蚀强、生产成本低,并可以延长发动机寿命。     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

快干羟基丙烯酸酯乳液的合成及性能研究

采用核壳乳液聚合方法制备了羟值为 1.5%的低羟丙烯酸酯乳液。研究了聚合物理论 T_g、壳中羟基质量分数、核聚合物 Hansch参数对双组分漆膜干燥速度的影响。结果表明：漆膜干燥速度随理论 T_g、壳中羟基质量分数及核聚合物 Hansch参数的增加而加快，当 T_g为 50 ℃、壳中羟基质量分数为 1.1%、核聚合物 Hansch参数为 3.43时，漆膜于 25 ℃、60%相对湿度下的实干时间可缩短至 95 min，在大巴、工程机械涂装等需要快干的领域具备潜在应用价值。     

Retention of Eucalyptol,a Natural Volatile Insecticide,in Delivery Systems Based on Hydroxypropyl‐β‐Cyclodextrin and Liposomes

Eucalyptol (Euc) is a natural monoterpene with insecticide effects. Being highly volatile and sensitive to ambient conditions, its encapsulation would enlarge its application. Euc‐loaded conventional liposomes (CL), cyclodextrin/drug inclusion complex, and drug‐in‐cyclodextrin‐in‐liposomes (DCL) are prepared to protect Euc from degradation, reduce its evaporation, and provide its controlled release. The liposomal suspension is freeze‐dried using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as cryoprotectant. The liposomes are characterized before and after freeze‐drying. The effect of Euc on the fluidity of liposomal membrane is also examined. A release study of Euc from delivery systems, in powder and reconstituted forms, is performed by multiple head extraction at 60 °C after 6 months of storage at 4 °C. CL and DCL suspensions are homogeneous, show nanometric vesicles size, spherical shape, and negative surface charge before and after freeze‐drying. Moreover, HP‐β‐CD does not affect the fluidity of liposomes. CL formulations present a weak encapsulation for Euc. The loading capacity of eucalyptol in DCL is 38 times higher than that in CL formulation. In addition, freeze‐dried DCL and HP‐β‐CD/Euc inclusion complex show a higher retention of eucalyptol than CL delivery system. Both carrier systems HP‐β‐CD/Euc and Euc‐loaded DCL decrease Euc evaporation and improve its retention. Practical Applications: Eucalyptol is a natural insecticide. It is highly volatile and poorly soluble in water. To enlarge its application, its encapsulation in three delivery systems (conventional liposomes, cyclodextrin/drug inclusion complex, combined system composed of cyclodextrin inclusion complex and liposome) is studied. In this paper it is proved that cyclodextrin/eucalyptol inclusion complex and eucalyptol‐in‐cyclodextrin‐in‐liposome are effective delivery systems for encalyptol encapsulation, retention, and release.     

铸绩效理论指导壳型铸造气缸体组芯胎具的优化设计

介绍了小型干式缸套气缸体复杂薄壁类铸铁件壳型铸造生产中,应用传统观念手工组芯方法存在的诸多不足。阐述了采用绩效理论指导小型气缸体壳型铸造的气缸体砂型铸造中组芯胎具的工艺结构、砂芯锁紧工艺结构和方法等方面的优化设计,以及使其能在小型干式缸套气缸体铸铁件壳型铸造过程中获得良好的工艺效果。     

热风干燥温度对丹东板栗感官品质的影响

目的 研究了不同干燥温度对带壳丹东板栗干燥速率、含水率变化、板栗成品的组织状态、色泽以及口感的影响。方法 样品板栗分别进行在40、45、50 ℃以及变温条件下的热风干燥实验。温度数据采集利用T型热电偶，通过计算机控制安捷伦数据采集仪来记录。干燥后的板栗去壳、去红衣，记录板栗仁的颜色变化、内部形态变化以及口感变化。结果 丹东板栗40℃干燥条件下的干燥成品质量好，口感佳，但效率低，45℃条件下的干燥速率较高，但是成品内部发生了皱缩，50℃条件下的干燥速率最高，但不仅成品内部发生了皱缩，表皮颜色也呈褐色，而变温干燥的干燥质量良好且干燥速率高。结论 变温干燥可以解决板栗在干燥过程中不同阶段对温度的敏感程度不一样带来的影响，因此相当对传统的单一温度干燥，变温干燥更有研究前景。     

基于红外测温的文物冷冻干燥监测技术

为了给大型、大批量文物的冷冻干燥保驾护航，以饱水木质文物为样品，结合红外温度传感器和红外热像仪，对文物的冷冻过程进行温度监控。结果表明，红外温度传感器对样品表面温度变化十分灵敏，能有效跟踪温度的动态变化过程，但测量准确性会受样品发射率、环境波动等因素的影响。红外热像仪经发射率标定后可达到较高的测量精度，利用热成像得到的图像，可直观地筛查样品表面的最高/最低温度区。经过分析，样品在靠近仓内换热器端的位置，表面温度较低，靠近仓门的位置，表面温度较高，且样品上表面温度略低于侧面温度。根据红外测温结果，预期能给出冷冻干燥设备控制的建议，降低文物冻干失败的风险，减轻文保工作者的工作负担。     

The influence of the carrier addition and spray drying temperatures on physicochemical properties of microencapsulated carrot juice powder

The objective of this study was to determinate the influence of carrier addition and spray drying temperatures (160 or 200°C) on physicochemical properties of spray-dried carrot juice powder. As carriers, maltodextrin and gum Arabic in different proportions were used. In powders were determined the following: moisture content, water activity, apparent density, size of particles, colour and carotenoids content. The content of carotenoids in powders prepared from solutions with juice to carrier ratio 2:3 was 324.3–406.6 mg/kg d.m., while in powders with a J:C = 3:2 values ranged from 576.7 to 637.7 mg/kg d.m. The highest content of carotenoids and the most yellow colour were observed in powders with 1:3 gum Arabic to maltodextrin ratio. Powders with the highest amount of gum Arabic have the highest diameter and the lowest water activity. High inlet temperature caused brighter colour of powders, higher dry matter content, lower water activity and apparent density of powders.     

DR环形吹风冷却装置及智能控制系统设计研究

介绍了河北达瑞化纤机械有限公司开发的DR环形吹风冷却装置,该装置能实现自动、精准、快速更换整流筒,打破了原有环吹风装置整流筒从风室顶部安装这一传统模式,利用风室底部安装和风室密封结构改变,采用气缸动力下的自动调节技术,实现了快速更换整流筒。该装置在维修和更换整流筒组件时,无须搬动上压盖,无须拆装若干螺栓,能自动化操作,降低了操作工人劳动强度,缩短了操作时间。开发的DCS智能控制系统,实现了实时智能监测冷却吹风装置的运行状况。